Selected good materials
6063 original aluminum rod, high hardness, super strong wind pressure resistance, high safety factor.
Standard quality
Standard 304 stainless steel diamond mesh, anti-theft and anti-pry, keep away mosquitoes and keep indoor ventilation.
Fully hidden frame
Three-circle hidden frame design, waterproof performance improved by 10pa.
Convenient and practical
You can choose to install an openable protective fence clothes drying rack/56mm mini terrace, which is convenient and practical.
| 6063 original aluminum bar hardness comparison (T6＞T5＞T4) | |||
|---|---|---|---|
| Aluminum state | 6063—T4 | 6063—T5 | 6063—T6 |
| Aluminum properties | T4 has lower hardness and better deformability,Suitable for later deformation processing such as bending. | T5 has a higher hardness and a certain degree of deformability, and is commonly used in ordinary architectural aluminum profiles, industrial aluminum profiles, door and window products, etc. | T6 state is the highest hardness state of 6063 aluminum material, and is suitable for occasions with high requirements on material hardness, such as building curtain walls. |
| Since T4 has low hardness and is easy to deform, it is not suitable for architectural aluminum profile processing. T6 has too high hardness and is easy to cause cracks when used for broken bridge aluminum teeth and pressing. Based on the consideration of safety, Chuanggao Doors and Windows adopts breakthrough technology to carry out secondary innovation and fusion of T5 and T6 aluminum profiles. The broken bridge part uses T5 profiles, and the non-broken bridge part uses T6 profiles. It combines rigidity and toughness, has greater hardness and tensile strength, better wind pressure resistance of windows, and higher safety of the whole window. |
|||
Liangjia Doors and Windows High Standard Glass Strategic Partner
the world's leading integrated glass manufacturer, makes every piece of glass just for your comfort and safety.
safety
The broken glass did not hurt anyone.
Transparency
Light transmittance close to 90%
Flatness
The glass surface is smooth, without water ripples or deformation
Glass strength
Glass strength is 4 times that of ordinary glass
Tensile bending resistance
The tensile bending strength is 3 times that of ordinary glass
Impact resistance
Impact resistance is 5 times that of ordinary glass
Optional glass for doors and windows
The specific usage of glass can be selected according to the actual conditions of the door and window products.
White tempered glass
Ultra-clear tempered glass
Changhong Glass
Wired glass
Laminated glass
High-transmittance Low-E glass
Blue tempered glass
Coated tempered glass
Insulating tempered glass
Magnetically controlled louvered glass
Features
(1)1.8mm profile wall thickness, stable structure, not easy todeform
(2)Three-sided hidden frame design to enhance waterproofperformance
(3)5mm+20A+5mm, large hollow glass, good sound insulationand heat insulation performance, magnetically controlledblinds can be installed to improve the window shadingcoefficient
(4)The middle hook is 35mm very narrow.and reinforcementmaterials can be added to the hook to make the windowmore solid and better resistant to wind pressure.
(5)Fluorocarbon hollow aluminum bar, one-piece bending processto prevent the hollow aluminum bar from oxidation: warm edgebar is optional
(6)The lower rail can be equipped with a 7-shaped largehandrail and a 56mm small terrace, which is more practical
(7)The outer frame and upper and lower rails are connectedat 90 dearees, which has hiah installation efficiency and iseasy to disassemble and assemble on site.Combinedwith the waterproof rubber pads.the waterproofperformance of the ioints is areatly improved.
(8)Multi-cavity structural design, doors and windows havehigher performance in five aspects (air tightness, watertightness,heat preservation, sound insulation, windpressure resistance).
(9)The upper wheel adopts typhoon-proof and swing-proofwheel, which is balanced and anti-falling and anti-swaying.
(10)Add molecular sieve desiccant to effectively prevent theinsulating glass from fogging, condensation and frost
(11)The lower pulley adopts amber sunken silent pulley.which is smooth to push and pull and opens and closessilently
(12)Fan material embedded desian, better sealing
(13)304 stainless steel quide rails, double-track push-pull/triple.track push-pull optional
(14)An openable quardrail can be installed at the lower fixedglass.Clothes can be hung to dry after the guardrail isopened, which is convenient to use.
Performance parameter
Sound insulation performance(LV3)
Thermal insulation performance(LV5)
Water tightness performance(LV4)
Airtightness performance(LV6)
Wind pressure resistance performance(LV9)
High quality hardware from top brands provides greater safety assurance
① Anti typhoon and anti swing wheels
② Customized amber silent pulley
③ Hohmann hidden latch
Scientific Design · Solving Large Area Openings
Sliding window large opening scheme
(1)Using eight amber pulleys to enhance load-bearing capacity
(2)The maximum load-bearing capacity of a single push-pull fan is200kg The thickest insulating glass can be made 8mm+12A+8mm
(3)Adopting the installation of reinforced hooks to enhance windpressure resistance, the maximum width of the push-pull fancan be 2500mm</p>
(4)The maximum size of the sliding fan is 2500mm</p>
(5)Indoor installation with an additional 5.0mm thicknessReinforced 7-shaped large armrest
(6)Outdoor installation with a thickness of 5.0mmReinforced stepped down rail
Wind load in the coastal areas of South China: 500-800N/m2
Wind load in the inland region of central China: 300-500N/m2
Opening method
Regular colors
Starlight Black
Light ink gray
Amber coffee
Skin whitening
Customizable window type
